Schroeven
Onze robuuste vijzels zetten rotatiebewegingen nauwkeurig om in lineaire hefbewegingen en zijn ideaal voor veeleisende positioneringstoepassingen. Deze mechanische componenten zijn ideaal voor industriële persen, transportsystemen en hefsystemen voor podia voor het veilig heffen en laten zakken van zware lasten.
- Lifting capacity up to 100 kN (up to 1,000 kN on request)
- Rotating or stationary spindle
- Various configurations available
Antwort innerhalb von 48h (Mo - Fr)
Staffelrabatte & Übernahme der Speditionskosten bei Jahresbestellungen auf Anfrage.
Technische Übersicht
| Hubkraft | bis 100 kN (bis 1.000 kN auf Anfrage) |
| Übersetzungen | 4:1 bis 36:1 |
| Max. Antriebsmoment | 60,20 Nm |
| Spindelarten | rotierend / stehend |
| Gehäuse | Aluminium-Druckguss / Stahl |
| Spindelwerkstoff | Stahl (Edelstahl optional) |
Dies sind Basiswerte. Detaillierte technische Informationen und Diagramme finden Sie im PDF-Katalog.
Interaktiver Konfigurator
TSE Spindelhub-Konfigurator
Konfigurieren Sie Ihr TSE-Spindelhubgetriebe in 8 Schritten — von der Baugröße bis zum Antrieb.
Konfigurator eingeschränkt nutzbar
Dieser Konfigurator dient der ersten Orientierung. Für ein verbindliches Angebot kontaktieren Sie uns gerne direkt — wir beraten Sie.
Baugröße / Hubkraft
Wählen Sie die benötigte Hubkraft für Ihre Anwendung.
Kompatible Produkte
Diese Produkte lassen sich optimal mit diesem Produkt kombinieren.
Häufige Fragen zu diesem Produkt
Our screw jacks are designed for lifting forces exceeding 100 kN. The exact lifting force depends on the frame size, the lead of the spindle, and the chosen spindle type (trapezoidal or ball screw). Reinforced versions are available for exceptionally high loads. Contact us for a project-specific engineering consultation.
The lifting speed is determined by the spindle lead and the input speed. Trapezoidal screw spindles achieve moderate lifting speeds with high positioning accuracy, while ball screws allow higher travel speeds with reduced wear. The optimal configuration depends on your requirements for speed and load capacity.
Yes, our screw jacks can be combined into multi-axis systems via mechanical connecting shafts, bevel gearboxes, or electronic synchronization. This enables uniform lifting and lowering motion at multiple points, as required for lifting platforms, presses, or stage systems.
Trapezoidal screw spindles offer the advantage of self-locking – the load remains in position without an additional brake. They are also more cost-effective and more robust against contamination. Ball screws achieve significantly higher efficiency (approx. 90% vs. 30–50% for trapezoidal thread), higher lifting speeds, and a longer service life, but generally require a holding brake.
For use in demanding environments, we offer screw jacks with various protective measures, including bellows, telescopic covers, and special seals. In addition, corrosion-resistant versions for use in wet or chemically aggressive environments are available.
Self-locking depends on the spindle type used. Screw jacks with trapezoidal screw spindles are generally self-locking and safely hold the load in position without an additional brake. Versions with ball screws, on the other hand, are not self-locking and require an external holding brake, but offer significantly higher efficiency.
We offer screw jacks in both rotating and stationary spindle configurations. In the rotating version, the spindle rotates and the lifting nut travels linearly. In the stationary version, the spindle is fixed and the nut rotates, enabling a more compact design. Both versions are documented in detail in our catalogs.