Home / Linear Systems / Linear Guides / Telescopic Rails / AKE Partial-Extension Telescopic Rail
AKE partial-extension telescopic rail by HA-CO: guide rail with extended slider

AKE Partial-Extension Telescopic Rail

The AKE partial-extension telescopic rail from HA-CO consists of a guide rail and a slider that move against each other on balls. With partial extension, the stroke is shorter than the rail length. AKE is available in sizes 22, 28, 35, 43 and 63 with lengths from 130 to 1,970 mm and strokes up to 1,013 mm. According to the data sheet, the static load rating C₀rad reaches 88,494 N per pair of rails.

  • Partial extension made of guide rail and slider, stroke shorter than the rail length
  • Five sizes, cross-section from 11 × 22 mm to 29 × 63 mm
  • Mounting holes at a fixed pitch of 80 mm
  • According to HA-CO, play-free running even at maximum load
Supplier
Request a Quote

Prices come with your quote – response within 48h (Mon – Fri)

Volume discounts & freight cost coverage for annual orders on request.

Technical Overview

Supplier HA-CO
Design Telescopic rail, partial extension (guide rail and slider)
Sizes 22, 28, 35, 43, 63
Length L 130 to 1,970 mm in 80 mm steps, range depends on size
Stroke H up to 1,013 mm
Static load rating C₀rad (HA-CO data) up to 88,494 N per pair of rails
Cross-section A × B 11 × 22 mm to 29 × 63 mm
Weight 1.32 to 10.30 kg/m per telescopic rail
Material (HA-CO data) Rail and slider cold-drawn carbon steel, balls hardened rolling bearing steel
Fastening Countersunk screws DIN 7991 (22–43), socket head cap screws DIN 7984 (63), according to data sheet

These are basic values. Detailed technical information and diagrams can be found in the PDF catalogue.

Documentation

Data sheet AKE partial extension (HA-CO, German): load ratings and cross-sections

Load ratings and dimensions

All table values according to the HA-CO data sheet. The load ratings are static load ratings and moments for a pair of rails (Mx: single rail, see *). Prices are provided with the quotation.

AKE 22

Length L [mm] Stroke H [mm] C₀rad [N] C₀ax [N] Mx* [Nm] My [Nm] Mz [Nm] Holes
130 76 626 438 5.7 20 30 2
210 111 1,430 1,002 10.7 72 102 3
290 154 1,988 1,392 14.9 138 198 4
370 196 2,556 1,790 19 226 324 5
450 231 3,402 2,380 24 360 516 6
530 274 3,958 2,770 28.2 496 710 7
610 316 4,524 3,168 32.3 654 934 8
690 351 5,378 3,764 37.3 872 1,246 9
770 394 5,934 4,154 41.5 1,078 1,538 10

AKE 28

Length L [mm] Stroke H [mm] C₀rad [N] C₀ax [N] Mx* [Nm] My [Nm] Mz [Nm] Holes
130 74 1,226 858 15.3 40 56 2
210 116 2,232 1,562 26.1 114 164 3
290 148 3,868 2,708 39.6 264 376 4
370 190 4,890 3,422 50.4 426 610 5
450 232 5,910 4,138 61.2 628 898 6
530 274 6,932 4,852 72 870 1,242 7
610 316 7,952 5,566 82.8 1,150 1,642 8
690 358 8,974 6,282 93.6 1,470 2,100 9
770 400 9,994 6,996 104.4 1,828 2,612 10
850 433 11,656 8,160 117.9 2,330 3,330 11
930 475 12,676 8,872 128.7 2,778 3,968 12
1,010 517 13,696 9,586 139.5 3,262 4,660 13
1,090 559 14,716 10,300 150.3 3,788 5,410 14
1,170 601 15,736 11,014 161.1 4,350 6,216 15

AKE 35

Length L [mm] Stroke H [mm] C₀rad [N] C₀ax [N] Mx* [Nm] My [Nm] Mz [Nm] Holes
210 127 2,130 1,492 29.4 114 164 3
290 159 4,120 2,884 46.9 292 416 4
370 203 5,276 3,694 59.9 476 680 5
450 247 6,434 4,504 73 708 1,010 6
530 279 8,564 5,994 90.4 1,086 1,550 7
610 323 9,716 6,802 103.5 1,422 2,030 8
690 367 10,870 7,608 116.6 1,804 2,576 9
770 399 13,042 9,130 134 2,382 3,404 10
850 443 14,190 9,932 147.1 2,870 4,100 11
930 487 15,338 10,736 160.2 3,404 4,862 12
1,010 519 17,530 12,272 177.6 4,184 5,978 13
1,090 563 18,674 13,072 190.7 4,824 6,890 14
1,170 607 19,818 13,874 203.8 5,508 7,868 15
1,250 639 22,024 15,416 221.2 6,490 9,272 16
1,330 683 23,164 16,214 234.3 7,280 10,400 17
1,410 727 24,306 17,014 247.4 8,116 11,594 18
1,490 759 26,520 18,564 264.8 9,300 13,286 19

AKE 43

Length L [mm] Stroke H [mm] C₀rad [N] C₀ax [N] Mx* [Nm] My [Nm] Mz [Nm] Holes
210 123 3,190 2,234 60.6 168 240 3
290 158 5,744 4,020 93.8 402 576 4
370 208 6,754 4,728 115.9 616 880 5
450 243 9,380 6,566 149.2 1,018 1,456 6
530 278 12,078 8,454 182.4 1,524 2,176 7
610 313 14,822 10,376 215.6 2,128 3,042 8
690 363 15,726 11,008 237.8 2,588 3,698 9
770 398 18,464 12,926 271 3,362 4,804 10
850 433 21,230 14,862 304.2 4,238 6,054 11
930 483 22,108 15,476 326.4 4,878 6,968 12
1,010 518 24,868 17,408 359.6 5,922 8,460 13
1,090 568 25,754 18,028 381.8 6,674 9,534 14
1,170 603 28,508 19,956 415 7,886 11,266 15
1,250 638 31,276 21,894 448.2 9,198 13,142 16
1,330 688 32,150 22,504 470.4 10,130 14,472 17
1,410 723 34,912 24,438 503.6 11,612 16,590 18
1,490 758 37,690 26,382 536.8 13,196 18,850 19
1,570 793 40,476 28,334 570.1 14,880 21,256 20
1,650 843 41,322 28,926 592.2 16,058 22,940 21
1,730 878 44,104 30,872 625.5 17,912 25,588 22
1,810 928 44,958 31,472 647.6 19,202 27,432 23
1,890 963 47,734 33,414 680.8 21,224 30,320 24
1,970 1,013 48,596 34,018 703 22,628 32,324 25

AKE 63

Length L [mm] Stroke H [mm] C₀rad [N] C₀ax [N] Mx* [Nm] My [Nm] Mz [Nm] Holes
610 333 21,182 14,828 474 3,106 4,438 8
690 373 25,068 17,548 547.5 4,144 5,920 9
770 413 28,978 20,284 621 5,332 7,616 10
850 453 32,904 23,032 694.5 6,668 9,526 11
930 493 36,842 25,790 768 8,154 11,648 12
1,010 533 40,790 28,554 841.4 9,788 13,984 13
1,090 573 44,746 31,322 914.9 11,574 16,534 14
1,170 613 48,708 34,096 988.4 13,508 19,296 15
1,250 653 52,674 36,872 1,061.9 15,590 22,272 16
1,330 693 56,644 39,650 1,135.4 17,824 25,462 17
1,410 733 60,618 42,432 1,208.9 20,204 28,864 18
1,490 773 64,594 45,216 1,282.4 22,736 32,480 19
1,570 813 68,574 48,002 1,355.9 25,416 36,310 20
1,650 853 72,554 50,788 1,429.4 28,246 40,352 21
1,730 893 76,536 53,576 1,502.8 31,226 44,608 22
1,810 933 80,522 56,364 1,576.3 34,354 49,078 23
1,890 973 84,506 59,154 1,649.8 37,632 53,760 24
1,970 1,013 88,494 61,946 1,723.3 41,060 58,656 25

Cross-section and weight

Size A [mm] B [mm] I [mm] J [mm] G [mm] E₁ [mm] E₂ [°] V C F Weight per telescopic rail [kg/m]
22 11 22 10.25 11.3 6.5 3 – M4 – M4 1.32
28 13 28 12.25 15 7.5 1 – M5 – M5 2.02
35 17 35 16 15.8 10 2 – M6 – M6 3.05
43 22 43 21 23 13.5 2.5 – M8 – M8 5.25
63 29 63 28 29.3 10.5 – 2 x 45 – M8 M8 10.30

Lengths, versions and CAD data on request. Request a quote →

Notes from TEA on mounting and sizing

  • * According to the data sheet, Mx applies to a single telescopic rail; C₀rad, C₀ax, My and Mz apply to a pair of rails.
  • The load ratings apply with the slider fully extended and the load centred, without a safety factor. Deflection in the extended position is determined mainly by the stiffness of the adjoining structure. We advise you on sizing with safety factor and deflection.
  • Mounting holes at a pitch of 80 mm, the outer holes 25 mm from the rail end. To reach all mounting holes, the locking screw is removed during mounting and refitted afterwards. The internal stops only hold the unloaded slider; provide external end stops for loaded applications.
  • Holes V for countersunk screws to DIN 7991 (size 22–43), holes C for socket head cap screws to DIN 7984 (size 63). Standard references and F (size) according to data sheet fig. 35.

Source of the table values and hole pattern: HA-CO data sheet, AKE partial extension, pages TR-8, TR-9, TR-10, TR-11.

Compatible Products

These products can be optimally combined with this product.

PSG Roller Guide
Roller Guides

PSG Roller Guide

Stainless steel roller guide, also by HA-CO

Ball Guides
Linear Guides

Ball Guides

Profile rail guides with recirculating balls

Frequently Asked Questions

Was this page helpful?
Anonymous · without cookies
+49 [40] 5388921-11 sales@tea-hamburg.de